The FloPlast 68mm Black Round Downpipe 92.5 Degree Offset Bend is used for making a swan neck/offset from the downpipe outlet to the wall. Simple and easy to install, this system is compatible with most plastic systems manufactured to BS EN 12200. The system offers amazing flo... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
The FloPlast 68mm Black Round Downpipe 92.5 Degree Offset Bend is used for making a swan neck/offset from the downpipe outlet to the wall. Simple and easy to install, this system is compatible with most plastic systems manufactured to BS EN 12200.
The system offers amazing flow capacity when removing rainwater from your roof, making this a great choice for new builds, house refurbishments, conservatories and extensions.
The lower end of the swan neck/offset should be secured with a pipe clip. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 6.5mm screws.
This offset bend is compatible with most plastic systems manufactured to BS EN 12200. The lower end of the swan neck/offset should be secured with a pipe clip. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 6.5mm screws.
Please note:
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
