Polylok’s Poly-Air activated carbon vent filter can remove offensive odours such as Hydrogen Sulphide as they exit the sewer pipe network through vent pipes. This filter will eliminate these unpleasant odours. The Problem Every building with a wash hand bash or toilet for ex... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Polylok’s Poly-Air activated carbon vent filter can remove offensive odours such as Hydrogen Sulphide as they exit the sewer pipe network through vent pipes. This filter will eliminate these unpleasant odours.
Every building with a wash hand bash or toilet for example has a network of sewer pipes installed typically beneath the floor to take away the wastewater. Odours from this sewer pipe network and septic tanks are frequent but often a random nuisance problem in home, work or elsewhere. When they occur they are unpleasant and even embarrassing. All sewer pipe networks and septic tanks should have vent pipes installed. These vent pipes allow the pressure to equalise as wastewater flows into the network from a sink, toilet or other sources. Without vent pipes, flow into the sewer network will be compromised and therefore it would not function correctly. Under normal conditions the vented air from the sewer pipe network is direct to the outside of the building and disperses into the outside air unnoticed. However, random event can occur where the wind outside redirects the odour from the vent pipe back towards an occupied area of the building.
Install a Poly-Air activated carbon vent filter to prevent the odour problem by removing the offensive odours such as Hydrogen Sulphide as they exit the sewer network vent pipes.
The Poly-Air activated carbon vent filter is designed to fit your existing sewervent pipe. The standard unit will fit the most common 110mm sewer vent pipe. In situations where there is another sized vent pipe the Poly-Air will match the standard reducers and pipe fittings readily available in hardware stores or builders merchants.
Question:
Is the product filled with carbon pellets or a removable filter?
Answer:
I can confirm the Polyair Vent is supplied complete with a carbon sachet.
This is removable and can easily be replaced.
Question:
How is this filter fitted?
Answer:
The Polyair Vent is fitted just like a standard Vent Cowl.
It is pushfit onto the top of the 110mm Pipe so that all airflow has to pass through the Polyair Vent.
Question:
Do you need to change the carbon filter on a Marsh poly-air soil pipe activated carbon vent filter? If so, how frequently?
Answer:
The carbon on the Marsh poly-air soil pipe activated carbon vent filtewill need to be replaced every five years.
Question:
Can a Marsh poly-air Soil pipe activated carbon vent filter 110mm be fitted to a cast iron vent pipe?
Answer:
Yes, the Marsh poly-air soil pipe activated carbon vent filter will fit a cast iron pipe, provided the internal diameter is 110mm.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
