Solar Panel Mesh Wire Clip

Name: Solar Panel Mesh Wire Clip
Brand: PestFix
SKU: WM132
Price: 3.22 GBP
Availability: InStock

Code:

WM132

Brand:

PestFix

This Solar Panel Mesh Wire Clip is made from UV-stabilised Nylon and works to attach wire mesh to solar panels, helping to form a system designed to prevent all kinds of birds from accessing the underneath of rooftop solar arrays. As a result, you can easily protect the roof, ... Read More

View full product details

View questions about this product

£3.22 Incl. VAT

Earn points

Est. Delivery: 1-2 Working Days

Shipping costs displayed in basket.

For delivery Monday, Dec 30th - order in:

days hrs mins secs

Subject to stock availability, if products on a 24 hours service are ordered alongside products NOT on a 24 hours service, this may delay your whole order.

View Transport Policy

View full product details

View questions about this product

Create a wishlist

John Wood

Description

The patent-pending plastic clips are not only UV stable but also gentle on anodised frames of solar panels, ensuring longevity. Installation is easy with the spacing of two clips per 450mm (18 inches) on shorter edges and three on longer ones, meaning the mesh is secure without drilling holes or harming the system. Constructed to accommodate the Solar Panel Mesh (WM132), the clips are almost invisible from ground level.

Features & Benefits: Solar Panel Mesh Wire Clip

For use on rooftop solar panel arrays
Prevents all bird types and pressures from getting underneath the array
Made from UV-stabilised Nylon
A new, swift, highly efficient approach to solar panel exclusion
Easy to use when binding mesh to solar panels
Gentle on anodised frames of solar panels

Installation

Position clips every 18 inches on the panel support bracket, sliding them to the panel's edge. Ensure they are slid as outward as possible and on the panel's lip. When placing the wire mesh screen, make sure the fastener rod protrudes at an upward angle to maintain downward pressure on the screen towards the roof. Slide the disk onto the clip's shaft snugly, adjusting the screen as needed. Tighten the disk to the panel edge and ensure a 75mm (3-inch) mesh overlap for the next section. Trim the excess mesh screen above the solar panel array and cut the clip assembly rod flush with the speed washer exterior, using wire cutters like NT119 or NT120.

Please note:

For this clip to work, the solar panel must have a minimum 20mm return lip on the underside of the frame.
A typical solar panel is approximately 1.6m tall and 1m wide and requires three clips on each long edge and two clips on each short edge. See the diagram attached to this product listing for more details and an example of a typical installation.