Designed to create a branch from a surface water drainage main line at a 45° angle, JFC Manufacturing's Twinwall drain pipe Y unequal branch is a triple socket section manufactured from HDPE plastic. Manufactured by a twin extrusion process, which means having two layers simul... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Designed to create a branch from a surface water drainage main line at a 45° angle, JFC Manufacturing's Twinwall drain pipe Y unequal branch is a triple socket section manufactured from HDPE plastic.
Manufactured by a twin extrusion process, which means having two layers simultaneously extruded, a strong and durable structure is assured. The process is performed once inside and the other heat welded together in a continuous process. The outer wall is also corrugated for exceptional strength, reducing the potential for on-site damage to occur. As opposed to the inner wall which is smooth with a seamless finish to assist hydraulic flow. Better yet, the modern design means that unlike traditional single-wall pipes it will prevent slit accumulation.
The branch complies with HAPAS Roads and Bridges Agrément Certificate No. 02/H069, is BBA approved and, if installed correctly with three sealing rings, a watertight system is achievable. If it is too long, you can also cut the branch as needed to fit accordingly.
Please note:
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
